American Clean & Seal FAQs

No, UHP water blasting or water jetting uses 20,000 to 40,000 psi to achieve its work. Normal pressure washing uses 1,000 to 4,500 psi water pressure. There is a massive difference in the power of the water.

Many variables must be considered when answering such a broad question. Still, if the concrete is in a water treatment, containment, or pool-like environment, there is no question that high pressure (5,000 to 10,000 psi) or ultra-high pressure (20,000 to 40,000 psi) water blasting is the best way to prepare the surface.

Absolutely — the key is to understand the proper methods for preparation and application for these surfaces. We've worked on countless pools with these surfaces.

A typical residential pool requires two to three days for the actual work to be completed. This usually involves a day for preparation and minor repairs and one to two days for two coats of immersion-grade epoxy. Add another day if the caulking is necessary. Following the actual work, seven days are required to allow complete curing of the coating before re-filling with water to assure a durable and long useful life for the pool / pool coating. Total time is weather dependent, of course, but it typically adds up to 10 to 14 days total.

Yes, we can often save an old, failing swimming pool. The specific conditions of the concrete or plaster, underlying or surrounding ground conditions, and surface issues are all important. For this reason, we should give specific answers and recommendations to the actual conditions and situation of your pool. We offer FREE estimates — just give us a call.